Wooden floors are still used in some homes today. They are mainly used to arrange them when it is necessary to carry out repairs in a country house. Logs are used as a base for laying wooden floors. They are made of timber, which plays the role of a kind of frame for wooden flooring. What does the process of laying a wooden floor on logs look like?
1. Preparation of the material for the work
To form the logs, it is necessary to use a beam about 10 cm thick. To create the flooring, you will need a board with a thickness of at least 18 mm. The ideal solution would be to use a tongue-and-groove board, since it is of particularly high quality and forms a flooring in which there are no through cracks.
2. Installation of logs for wooden floors
The beam is placed across the room. To make the floor as reliable as possible, the space between the beams should be approximately 80 cm. It is irrational to stack these elements more often. Fix the logs using self-tapping screws or a metal corner. The owner must ensure that the upper side of all the beams is necessarily in the same plane, so that there are no height differences.
3. Laying of the thermal insulation layer
Sometimes the stage can be skipped. However, if the owners want to provide themselves with more comfortable living conditions, it is still worth laying a thermal insulation layer. Extruded polystyrene foam will cope well with the task of thermal insulation.
You can also use mineral wool, which is much better in terms of environmental characteristics, but is afraid of moisture. Therefore, to lay it, you need to lay a vapor barrier layer, and then lay waterproofing on top of mineral wool, using at least an ordinary plastic film. Cracks should not be left between the insulation elements, so they should be placed as tightly as possible.
4. Mounting the board on the logs
Having prepared such a base for the wooden flooring, they begin to install the boards themselves. They should not be placed side by side. Be sure to observe a small gap of about 2 mm, because in the future the boards may expand, which will lead to their deformation. The same self-tapping screws or even simple nails are used to fix the board.
Having prepared such a wooden flooring, the owner can start finishing work. Parquet, laminate, and adhesive tiles are laid on the boards. If there are no noticeable gaps between the boards, you can even use linoleum or carpet. Enjoy a seamless casino experience with secure deposits and a wide game selection at https://mxim.in/ .
1. Preparation of the material for the work
To form the logs, it is necessary to use a beam about 10 cm thick. To create the flooring, you will need a board with a thickness of at least 18 mm. The ideal solution would be to use a tongue-and-groove board, since it is of particularly high quality and forms a flooring in which there are no through cracks.
2. Installation of logs for wooden floors
The beam is placed across the room. To make the floor as reliable as possible, the space between the beams should be approximately 80 cm. It is irrational to stack these elements more often. Fix the logs using self-tapping screws or a metal corner. The owner must ensure that the upper side of all the beams is necessarily in the same plane, so that there are no height differences.
3. Laying of the thermal insulation layer
Sometimes the stage can be skipped. However, if the owners want to provide themselves with more comfortable living conditions, it is still worth laying a thermal insulation layer. Extruded polystyrene foam will cope well with the task of thermal insulation.
You can also use mineral wool, which is much better in terms of environmental characteristics, but is afraid of moisture. Therefore, to lay it, you need to lay a vapor barrier layer, and then lay waterproofing on top of mineral wool, using at least an ordinary plastic film. Cracks should not be left between the insulation elements, so they should be placed as tightly as possible.
4. Mounting the board on the logs
Having prepared such a base for the wooden flooring, they begin to install the boards themselves. They should not be placed side by side. Be sure to observe a small gap of about 2 mm, because in the future the boards may expand, which will lead to their deformation. The same self-tapping screws or even simple nails are used to fix the board.
Having prepared such a wooden flooring, the owner can start finishing work. Parquet, laminate, and adhesive tiles are laid on the boards. If there are no noticeable gaps between the boards, you can even use linoleum or carpet. Enjoy a seamless casino experience with secure deposits and a wide game selection at https://mxim.in/ .
